Details

---

BUY JQX-102F-P 12VDC https://www.utsource.net/itm/p/12606901.html

Parameter	Value
Type	Relay
Model	JQX-102F-P
Coil Voltage	12V DC
Coil Power	1.2W
Contact Form	SPDT (Single Pole, Double Throw)
Rated Load	10A @ 250V AC
Contact Resistance	≤ 50mΩ
Insulation Resistance	≥ 100MΩ at 500V DC
Dielectric Strength	2500V AC for 1 minute
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +125°C
Weight	30g
Dimensions	17.5mm x 12.5mm x 10.5mm

Instructions

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the coil terminals to a 12V DC power supply.
   • Connect the load to the common (C) and normally open (NO) or normally closed (NC) contacts as required.

3. Operation:

   • When the coil is energized, the normally open (NO) contact will close, and the normally closed (NC) contact will open.
   • When the coil is de-energized, the normally open (NO) contact will open, and the normally closed (NC) contact will close.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry, lint-free cloth if necessary.

5. Safety:

   • Do not exceed the rated voltage and current specifications.
   • Ensure the relay is disconnected from the power source before performing any maintenance or repairs.
   • Use appropriate personal protective equipment (PPE) when handling electrical components.

(For reference only)