Details

---

BUY BTA24-800 https://www.utsource.net/itm/p/12606904.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Repetitive Peak Off-State Voltage	VDRM	Tj = 25°C			800	V
Repetitive Peak Reverse Voltage	VRRM	Tj = 25°C			800	V
On-State Current (rms)	IT(RMS)	Tj ≤ 100°C, 1 cycle max		24		A
Non-Repetitive Peak On-State Current	I TTSM	Tj = 25°C, t = 10 ms		150		A
Holding Current	IH			30		mA
Gate Trigger Current	IG(T)	Tj = 25°C		10	50	mA
Maximum Junction Temperature	Tj(max)				125	°C

Instructions for BTA24-800

1. Mounting and Handling:

   • Ensure the device is mounted on a heatsink if continuous operation at high currents or in high ambient temperatures is expected.
   • Handle with care to avoid damage to the leads and body.

2. Operating Voltage:

   • Do not exceed the repetitive peak off-state voltage (VDRM) and repetitive peak reverse voltage (VRRM) ratings to prevent breakdown.

3. Current Ratings:

   • The on-state current (IT(RMS)) should not be exceeded for more than one cycle of the AC waveform to avoid overheating.
   • For non-repetitive conditions, ensure the peak on-state current (I TTSM) does not exceed the specified limit within the given time frame.

4. Gate Control:

   • Apply sufficient gate trigger current (IG(T)) to ensure reliable turn-on. The typical value is around 10 mA, but it can go up to 50 mA under certain conditions.

5. Temperature Considerations:

   • Keep the junction temperature (Tj) below the maximum allowed value (125°C) to maintain long-term reliability.

6. Testing and Verification:

   • Verify that the holding current (IH) is sufficient to keep the device in the on-state once triggered.
   • Conduct thorough testing under actual operating conditions to ensure all parameters are within safe limits.

7. Storage and Transportation:

   • Store in a dry environment and protect from electrostatic discharge (ESD) during transportation and handling.

(For reference only)