Details

---

BUY M62447SP https://www.utsource.net/itm/p/12606910.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VDD	Operating	2.7	-	5.5	V
Output Current	IOUT	Continuous	-	100	-	mA
Quiescent Current	IQ	VDD = 5V	-	10	-	渭A
Shutdown Current	ISD	VSD = 0V	-	0.1	-	渭A
Dropout Voltage	VDROPOUT	IOUT = 100mA	-	0.3	-	V
Operating Temperature	TOPR	Storage	-40	-	85	掳C

Instructions for M62447SP

1. Power Supply Connection:

   • Connect the positive supply voltage (VDD) to the input pin.
   • Ensure the supply voltage is within the operating range of 2.7V to 5.5V.

2. Ground Connection:

   • Connect the ground (GND) pin to a stable ground reference.

3. Output Configuration:

   • The output pin should be connected to the load requiring power regulation.
   • Ensure the load does not exceed the maximum continuous output current of 100mA.

4. Quiescent and Shutdown Current:

   • For low-power applications, ensure the quiescent current is within acceptable limits.
   • To minimize power consumption, use the shutdown feature by pulling the shutdown pin (VSD) low.

5. Thermal Considerations:

   • Operate the device within the specified temperature range (-40掳C to 85掳C).
   • Provide adequate heat dissipation if the device is expected to operate near its maximum current or in high ambient temperatures.

6. Capacitor Requirements:

   • Place a bypass capacitor (typically 0.1渭F) close to the input pin to filter noise.
   • An output capacitor (typically 1渭F) may be required for stability depending on the application.

7. Dropout Voltage:

   • Be aware of the dropout voltage when designing the power supply system to ensure sufficient headroom between the input and output voltages.

(For reference only)