Details

---

BUY JZC-40F-012-HS https://www.utsource.net/itm/p/12606918.html

Parameter	Description
Model	JZC-40F-012-HS
Type	Relay
Contact Form	SPDT (Single Pole Double Throw)
Rated Voltage	12V DC
Rated Current	10A (resistive load)
Coil Resistance	330Ω ± 5% at 20°C
Pick-up Voltage	≤ 8.4V DC
Drop-out Voltage	≤ 1.2V DC
Insulation Resistance	≥ 100MΩ at 500V DC
Dielectric Strength	1500V AC for 1 minute
Mechanical Life	10 million operations (min.)
Electrical Life	100,000 operations (min.) at rated load
Operating Temperature	-40°C to +85°C
Storage Temperature	-40°C to +85°C
Humidity	95% RH (non-condensing)
Dimensions	36.5mm x 22.5mm x 24.5mm
Weight	18g

Instructions:

1. Installation:

   • Ensure the relay is installed in a location that meets the operating temperature and humidity requirements.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the coil terminals to the control circuit using the appropriate voltage (12V DC).
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load and power supply according to your application.

3. Operation:

   • When the control voltage is applied to the coil, the relay will energize, causing the contacts to switch from the NC to the NO position.
   • When the control voltage is removed, the relay will de-energize, and the contacts will return to the NC position.

4. Maintenance:

   • Regularly inspect the relay for any signs of wear or damage.
   • Clean the relay with a dry, soft cloth if necessary.

5. Safety:

   • Do not exceed the rated voltage and current specifications.
   • Ensure proper insulation and isolation to prevent electrical shock.
   • Avoid exposing the relay to extreme temperatures or humid environments.

(For reference only)