Details
BUY CS3815EO https://www.utsource.net/itm/p/12606920.html
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2.7 | 5.0 | 5.5 | V | |
| Quiescent Current | IQ | - | 1.0 | - | mA | VDD = 5V |
| Shutdown Current | ISD | - | 0.01 | - | 渭A | VSD = 0V |
| Output Voltage | VOUT | - | 3.3 | - | V | VDD = 5V |
| Load Current | ILOAD | - | 150 | - | mA | VDD = 5V |
| Dropout Voltage | VDROPOUT | - | 0.2 | - | V | ILOAD = 150mA, VDD = 5V |
| Operating Temperature | TOPR | -40 | - | 85 | 掳C | |
| Storage Temperature | TSTG | -65 | - | 150 | 掳C |
Instructions for Use
Power Supply:
- Connect the supply voltage (VDD) to the input pin. Ensure the voltage is within the specified range (2.7V to 5.5V).
- Ground (GND) must be connected to the ground reference.
Output Configuration:
- The output voltage (VOUT) is typically 3.3V when VDD is 5V. No external components are required for this fixed output.
- For adjustable output configurations, refer to the datasheet for additional resistor values.
Shutdown Function:
- To enable the shutdown function, connect the shutdown pin (SD) to ground (GND). This will reduce the current consumption to the shutdown current (ISD).
- To activate the device, connect the SD pin to VDD or leave it floating.
Thermal Management:
- Ensure proper heat dissipation by using a heatsink if the load current exceeds typical operating conditions.
- Operate the device within the specified temperature range to avoid thermal damage.
Capacitors:
- Place a 1渭F ceramic capacitor close to the input pin (VDD) to filter out noise.
- A 1渭F ceramic capacitor should also be placed close to the output pin (VOUT) to stabilize the output voltage.
PCB Layout:
- Follow good PCB layout practices to minimize parasitic inductance and capacitance.
- Keep the ground plane solid and wide to ensure low impedance.
Handling:
- Handle the device with care to avoid static discharge which can damage the internal components.
- Store the device in a dry and cool environment to prevent moisture damage.
For more detailed information, refer to the official datasheet of the CS3815EO.
(For reference only)View more about CS3815EO on main site
