Details

---

BUY CD4001B https://www.utsource.net/itm/p/12606924.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	VDD	3	-	15	V	Operating voltage range
Input Low Voltage	VIL	-	-	3.5	V	Maximum input low voltage
Input High Voltage	VIH	6.5	-	-	V	Minimum input high voltage
Output Low Voltage	VOL	0.4	-	0.9	V	Maximum output low voltage (VDD = 5V)
Output High Voltage	VOH	2.4	-	4.5	V	Minimum output high voltage (VDD = 5V)
Input Current	IIN	-1	-	1	渭A	Input leakage current
Output Current (Sink)	IOL	-	-	-10	mA	Maximum output sink current
Output Current (Source)	IOH	-	-	10	mA	Maximum output source current
Propagation Delay Time	tpd	-	10	35	ns	Typical propagation delay time (VDD = 5V)
Power Dissipation	PD	-	-	100	mW	Maximum power dissipation per package
Operating Temperature Range	TA	-40	-	85	掳C	Ambient temperature range

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_DD) is within the specified range (3V to 15V).
   • Connect V_DD to the positive power supply and V_SS (or GND) to the ground.

2. Input Signals:

   • Apply input signals that meet the input voltage levels (V_IL and V_IH).
   • Avoid exceeding the maximum input voltage to prevent damage.

3. Output Handling:

   • Ensure the output current does not exceed the maximum ratings (I_OL and I_OH).
   • Use appropriate external components (e.g., resistors, capacitors) to protect the outputs when driving loads.

4. Propagation Delay:

   • Consider the typical propagation delay time (t_pd) when designing timing-sensitive circuits.
   • Adjust timing if necessary to accommodate the delay.

5. Temperature Considerations:

   • Operate the device within the specified temperature range (-40掳C to 85掳C) to ensure reliable performance.
   • Avoid exposing the device to extreme temperatures outside this range.

6. Storage and Handling:

   • Store the device in a dry, cool environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

7. Schematic and Layout:

   • Follow recommended PCB layout guidelines to minimize noise and improve signal integrity.
   • Use decoupling capacitors close to the power pins to stabilize the supply voltage.

By adhering to these parameters and instructions, you can ensure optimal performance and reliability of the CD4001B integrated circuit.

(For reference only)