Details

---

BUY TJA1057T https://www.utsource.net/itm/p/12606941.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	4.5	5.0	5.5	V	-
Output Current (High)	IOH	-	-25	-	mA	VOL = 0.4V, VCC = 5V
Output Current (Low)	IOL	25	-	-	mA	VOH = 2.4V, VCC = 5V
Input Voltage Range	VIN	-0.5	-	6.0	V	-
Differential Input Voltage	VID	-12	-	12	V	-
Common-Mode Input Voltage	VICM	-0.5	-	6.0	V	-
Data Rate	fDATA	-	125	-	kbps	CAN 2.0B
Propagation Delay	tPD	20	-	35	ns	-
Operating Temperature	TOP	-40	-	125	掳C	-
Storage Temperature	TSTG	-65	-	150	掳C	-
ESD Protection	HBM	-	-	2000	V	-

Instructions for TJA1057T

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations.

2. Input and Output Signals:

   • The input voltage range (V_IN) should be between -0.5V and 6.0V.
   • The differential input voltage (V_ID) can range from -12V to 12V.
   • The common-mode input voltage (V_ICM) should be between -0.5V and 6.0V.
   • The output current (I_OH and I_OL) should not exceed the specified limits.

3. Data Transmission:

   • The data rate (f_DATA) is up to 125 kbps for CAN 2.0B.
   • Ensure the propagation delay (t_PD) is within the specified range for reliable communication.

4. Temperature Considerations:

   • The operating temperature (T_OP) should be between -40掳C and 125掳C.
   • The storage temperature (T_STG) should be between -65掳C and 150掳C.

5. Electrostatic Discharge (ESD) Protection:

   • The device has built-in ESD protection up to 2000V (HBM).
   • Handle the device with care to avoid damage from static electricity.

6. Mounting and Handling:

   • Follow standard surface mount technology (SMT) guidelines for mounting the device.
   • Avoid mechanical stress on the pins and package during handling and installation.

7. Testing and Validation:

   • Perform initial testing under controlled conditions to ensure proper operation.
   • Validate the performance of the device in the intended application environment.

8. Compliance:

   • Ensure that the device complies with relevant industry standards and regulations for your specific application.

(For reference only)