Details

---

BUY 65F6190. https://www.utsource.net/itm/p/12606943.html

Parameter	Symbol	Min	Typical	Max	Unit	Description
Supply Voltage	VDD	2.7	-	5.5	V	Operating supply voltage range
Standby Current	ISB	-	1	5	渭A	Current consumption in standby mode
Operating Current	IOP	-	100	300	渭A	Current consumption during operation
Output Current per Pin	IO	-	20	40	mA	Maximum output current per I/O pin
Maximum Power Dissipation	PD	-	500	1000	mW	Maximum power dissipation at TA = 25掳C
Operating Temperature	TA	-40	-	85	掳C	Ambient operating temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range
Input Voltage Range	VIN	0	-	VDD	V	Valid input voltage range for digital inputs
Output Voltage (High)	VOH	0.85 * VDD	-	VDD - 0.1	V	Minimum output voltage when high
Output Voltage (Low)	VOL	0	-	0.1	V	Maximum output voltage when low
Rise Time	tr	-	10	20	ns	Time for output to rise from 10% to 90% of final value
Fall Time	tf	-	10	20	ns	Time for output to fall from 90% to 10% of final value
Propagation Delay	tp	-	20	40	ns	Time delay between input and output signal

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Use a stable power source to avoid voltage fluctuations that could affect performance.

2. Standby Mode:

   • To enter standby mode, set the appropriate control pin to the specified level (usually low).
   • Monitor the standby current to ensure it remains within the typical range of 1渭A to 5渭A.

3. Operating Mode:

   • During normal operation, the device consumes between 100渭A and 300渭A.
   • Ensure the operating temperature is within the range of -40掳C to 85掳C.

4. I/O Pins:

   • Each I/O pin can source or sink up to 40mA.
   • The input voltage range for digital inputs is from 0V to VDD.

5. Output Levels:

   • When the output is high, the voltage should be at least 0.85 times VDD and no more than VDD - 0.1V.
   • When the output is low, the voltage should not exceed 0.1V.

6. Timing Parameters:

   • The rise time (tr) and fall time (tf) should be within 10ns to 20ns.
   • The propagation delay (tp) should be within 20ns to 40ns.

7. Storage and Handling:

   • Store the device in a temperature range of -65掳C to 150掳C.
   • Handle the device with care to avoid static discharge and physical damage.

8. Power Dissipation:

   • Ensure the maximum power dissipation does not exceed 1000mW at an ambient temperature of 25掳C.
   • Use appropriate heat sinks or cooling methods if necessary to manage power dissipation.

(For reference only)