Details

---

BUY SZ-S-105L https://www.utsource.net/itm/p/12606944.html

Parameter	Description	Value
Part Number	Part Number	SZ-S-105L
Type	Type of Component	Surface Mount
Package	Package Type	SOT-23
Function	Function	Voltage Regulator
Input Voltage	Input Voltage Range	2.7V to 5.5V
Output Voltage	Output Voltage	1.8V
Output Current	Maximum Output Current	150mA
Quiescent Current	Quiescent Current (Typical)	10渭A
Dropout Voltage	Dropout Voltage (Typical)	120mV
Operating Temperature	Operating Temperature Range	-40掳C to 85掳C
Storage Temperature	Storage Temperature Range	-65掳C to 150掳C
Mounting	Mounting Type	Surface Mount
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use:

1. Soldering:

   • Use a temperature-controlled soldering iron with a tip temperature of 300掳C to 350掳C.
   • Ensure the soldering time does not exceed 3 seconds per pad.
   • Avoid excessive heat, as it can damage the component.

2. Handling:

   • Handle the component with care to avoid mechanical stress.
   • Use appropriate ESD (Electrostatic Discharge) protection measures to prevent damage.

3. Circuit Design:

   • Place the component close to the load to minimize trace inductance.
   • Use bypass capacitors (typically 10渭F and 0.1渭F) near the input and output pins to ensure stability and filter out noise.

4. Storage:

   • Store the components in a dry environment to prevent moisture absorption.
   • Use desiccant packets if storing for extended periods.

5. Testing:

   • Before final assembly, test the component in a controlled environment to ensure it meets the specified parameters.
   • Use a multimeter to check for proper voltage regulation and output current capabilities.

6. Troubleshooting:

   • If the output voltage is not stable, check for proper bypass capacitor placement and values.
   • Ensure the input voltage is within the specified range.
   • Verify that the component is not overheating due to excessive load or poor thermal management.

(For reference only)