Details

---

BUY NDD04N60ZG https://www.utsource.net/itm/p/12606945.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Drain-Source Voltage	VDS	-600	-	-	V	-
Gate-Source Voltage	VGS	-20	-	15	V	-
Continuous Drain Current	ID	-	4	8	A	@ TC = 25掳C, 100% Duty Cycle
Pulse Drain Current	ID(p)	-	8	16	A	@ TC = 25掳C, 10 渭s pulse, 1% Duty Cycle
Total Power Dissipation	PTOT	-	-	100	W	@ TC = 25掳C
Junction Temperature	TJ	-	-	175	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-
Thermal Resistance, Junction to Case	R胃JC	-	0.5	-	掳C/W	-
Gate Charge	QG	-	33	45	nC	-
Input Capacitance	Ciss	-	1200	1500	pF	-
Output Capacitance	Coss	-	290	360	pF	-
Reverse Transfer Capacitance	Crss	-	110	140	pF	-
Turn-On Delay Time	td(on)	-	15	30	ns	@ VGS = 15V, ID = 4A
Rise Time	tr	-	18	35	ns	@ VGS = 15V, ID = 4A
Turn-Off Delay Time	td(off)	-	15	30	ns	@ VGS = -4V, ID = 4A
Fall Time	tf	-	20	40	ns	@ VGS = -4V, ID = 4A

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid damage to the pins and body.
   • Avoid exposure to high humidity and temperatures outside the specified storage range.

2. Mounting:

   • Ensure proper thermal management by using a heatsink if necessary.
   • Apply thermal paste between the device and heatsink to improve heat dissipation.
   • Secure the device to prevent mechanical stress on the pins.

3. Electrical Connections:

   • Connect the gate to the control circuitry with a short, low-inductance path.
   • Ensure the source is properly grounded.
   • Use appropriate decoupling capacitors near the power supply lines to reduce noise.

4. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table.
   • Operate within the recommended operating conditions to ensure reliable performance.
   • Monitor the junction temperature to avoid overheating.

5. Testing:

   • Use a suitable test setup to verify the device parameters.
   • Follow the datasheet recommendations for test conditions and procedures.

6. Safety Precautions:

   • Always use appropriate safety equipment when handling high-voltage circuits.
   • Ensure the device is properly insulated to prevent electrical shock.
   • Follow all relevant safety standards and regulations.

(For reference only)