Details

---

BUY SC74822APVW https://www.utsource.net/itm/p/12606959.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VDD	1.6	-	3.6	V
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Input Leakage Current	IIH	-	1	5	渭A	VDD = 3.6V, VIN = VDD
	IIL	-	-1	-5	渭A	VDD = 3.6V, VIN = 0V
Output High Voltage	VOH	2.4	-	VDD	V	VDD = 3.6V, IOH = -0.4mA
Output Low Voltage	VOL	0	-	0.4	V	VDD = 3.6V, IOL = 16mA
Propagation Delay Time	tpd	5	7	9	ns	VDD = 3.6V, TA = 25掳C
Power Consumption	ICC	-	10	20	渭A	VDD = 3.6V, fIN = 1MHz, TA = 25掳C

Instructions for Use:

1. Supply Voltage (VDD):

   • Ensure the supply voltage is within the range of 1.6V to 3.6V to avoid damage to the device.

2. Operating Temperature (Toper):

   • The device is designed to operate within the temperature range of -40掳C to 85掳C. Operation outside this range may affect performance or reliability.

3. Storage Temperature (Tstg):

   • Store the device in an environment where the temperature ranges from -65掳C to 150掳C to prevent physical damage.

4. Input Leakage Current (IIH, IIL):

   • The input leakage current should be kept within the specified limits to ensure proper operation. For high-level inputs (VIN = VDD), the leakage current should not exceed 5渭A. For low-level inputs (VIN = 0V), it should not be less than -5渭A.

5. Output High/Low Voltage (VOH, VOL):

   • When the output is high (VOH), the voltage should be at least 2.4V and can go up to the supply voltage (VDD). When the output is low (VOL), the voltage should not exceed 0.4V.

6. Propagation Delay Time (tpd):

   • The propagation delay time is the time it takes for the output to respond to a change in the input. It should be between 5ns and 9ns under typical conditions (VDD = 3.6V, TA = 25掳C).

7. Power Consumption (ICC):

   • The power consumption should be kept within the specified range of 10渭A to 20渭A to ensure efficient operation. This is measured at VDD = 3.6V, with an input frequency of 1MHz and ambient temperature of 25掳C.

Additional Notes:

• Always refer to the datasheet for the most accurate and detailed information.
• Ensure that all connections are secure and correct to avoid damage to the device.
• Use appropriate decoupling capacitors near the power supply pins to reduce noise and improve stability.

(For reference only)