Details

---

BUY HT6116-70 https://www.utsource.net/itm/p/12606992.html

Parameter	Description	Value
Part Number	High Voltage DC-DC Converter	HT6116-70
Input Voltage Range	Range of input voltage for operation	4.5V to 40V
Output Voltage	Fixed output voltage	7.0V
Output Current	Maximum continuous output current	1.5A
Efficiency	Typical efficiency at nominal conditions	Up to 92%
Switching Frequency	Frequency of the internal switching regulator	1.2MHz
Operating Temperature	Temperature range for reliable operation	-40掳C to 85掳C
Storage Temperature	Temperature range for storage	-55掳C to 125掳C
Protection Features	Built-in protection mechanisms	Overcurrent, Overvoltage, Thermal Shutdown
Package Type	Type of package	SOT-23-6
Pin Configuration	Pin layout	VIN, VOUT, GND, EN, FB, COMP

Instructions for Use

1. Input Connection:

   • Connect the positive terminal of the input power supply to the VIN pin.
   • Connect the negative terminal of the input power supply to the GND pin.

2. Output Connection:

   • Connect the load or device to be powered between the VOUT and GND pins.

3. Enable Pin (EN):

   • The EN pin can be used to enable or disable the converter. Connect it to GND to disable, or leave it floating or connect to VIN to enable.

4. Feedback Pin (FB):

   • The FB pin is used for output voltage regulation. It should be connected to a voltage divider network if a different output voltage is required.

5. Compensation Pin (COMP):

   • The COMP pin is used for loop compensation. It should be connected to a compensation network as specified in the datasheet for optimal performance.

6. Capacitors:

   • Input Capacitor: Place a 10渭F ceramic capacitor close to the VIN and GND pins to filter input noise.
   • Output Capacitor: Place a 10渭F ceramic capacitor close to the VOUT and GND pins to stabilize the output voltage.

7. Thermal Management:

   • Ensure adequate heat dissipation by providing a good thermal path to the PCB or using a heatsink if operating at high currents or in high ambient temperatures.

8. Protection:

   • The HT6116-70 includes built-in overcurrent, overvoltage, and thermal shutdown protections. However, ensure that the input voltage and load do not exceed the specified limits to avoid damage.

9. Storage and Handling:

   • Store the device in a dry, cool place within the specified storage temperature range.
   • Handle with care to avoid static discharge and physical damage.

(For reference only)