Details

---

BUY M57174L-06D https://www.utsource.net/itm/p/12606999.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions/Notes
Supply Voltage	VDD	2.7	-	5.5	V	Operating Range
Output Current (Max)	IOUT	-	200	-	mA	Continuous, per output
Quiescent Current	IQ	-	30	-	渭A	All outputs off, VDD = 5V
Dropout Voltage	VDROPOUT	-	0.3	-	V	At 200mA output current, VDD = 5V
Output Voltage Tolerance	VOUT	-1.5	-	+1.5	%	Relative to nominal value
Thermal Shutdown	TSD	-	150	-	掳C	Thermal protection
Operating Temperature	TOPR	-40	-	85	掳C	Ambient temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the specified range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 10渭F and 0.1渭F) close to the power pins to stabilize the supply.

2. Output Configuration:

   • The device can provide up to 200mA per output channel continuously.
   • Ensure the load does not exceed this limit to avoid overheating and potential damage.

3. Thermal Management:

   • Monitor the operating temperature to ensure it stays below 85掳C.
   • If the device reaches the thermal shutdown temperature (150掳C), it will automatically turn off to prevent damage. Allow the device to cool before resuming operation.

4. Output Voltage:

   • The output voltage tolerance is 卤1.5% relative to the nominal value.
   • Verify the output voltage with a multimeter to ensure it meets the required specifications.

5. Storage and Handling:

   • Store the device in a dry environment within the storage temperature range of -65掳C to 150掳C.
   • Handle the device with care to avoid static discharge and physical damage.

6. Application Notes:

   • Refer to the datasheet for specific application circuits and additional information.
   • For high-reliability applications, consider derating the output current and operating temperature to ensure long-term reliability.

(For reference only)