Details

---

BUY HCPL-316J https://www.utsource.net/itm/p/12607002.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Current (Forward)	IF	5	20	40	mA	VDD = 5V, VOUT = 5V
Input Current (Reverse)	IR	-	0.1	1	mA
Input Voltage (Forward)	VF	1.0	1.2	1.4	V	IF = 20mA
Output Voltage (High)	VOH	3.8	4.7	5.0	V	IO = 4mA, VDD = 5V
Output Voltage (Low)	VOL	0	0.4	0.6	V	IO = 16mA, VDD = 5V
Output Current (Sink)	IOL	16	20	24	mA	VOL = 0.4V, VDD = 5V
Output Current (Source)	IOH	4	6	8	mA	VOH = 4.6V, VDD = 5V
Propagation Delay Time	tPD	2	5	7	渭s	IF = 20mA, VDD = 5V
Rise Time	tr	1	3	5	渭s	IF = 20mA, VDD = 5V
Fall Time	tf	1	3	5	渭s	IF = 20mA, VDD = 5V
Isolation Voltage	VIORM	-	-	5000	Vrms	1 minute, 50/60Hz
Operating Temperature	Toper	-40	-	105	掳C
Storage Temperature	Tstg	-55	-	125	掳C

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage (VDD) is within the specified range (4.75V to 5.25V).
   • Connect the power supply to the VDD pin and ground to the GND pin.

2. Input Connection:

   • Connect the input signal to the ANODE and CATHODE pins.
   • The forward current (IF) should be within the range of 5mA to 40mA for reliable operation.

3. Output Connection:

   • Connect the output load between the OUT and GND pins.
   • The output can sink up to 24mA and source up to 8mA.

4. Signal Timing:

   • Ensure that the propagation delay time (tPD), rise time (tr), and fall time (tf) meet the application requirements.

5. Isolation:

   • The device provides high isolation voltage (VIORM) of up to 5000Vrms for 1 minute at 50/60Hz.

6. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 105掳C.
   • Store the device within the temperature range of -55掳C to 125掳C.

7. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Follow proper soldering procedures to prevent thermal stress.

8. Mounting:

   • Mount the device on a suitable PCB with appropriate clearance to ensure proper heat dissipation and electrical isolation.

(For reference only)