Details

---

BUY BC182 https://www.utsource.net/itm/p/12607025.html

Parameter	Symbol	Min	Typical	Max	Unit
Collector-Emitter Voltage	VCEO	-	30	-	V
Collector-Base Voltage	VCBO	-	45	-	V
Emitter-Base Voltage	VEBO	-	6	-	V
Collector Current (Continuous)	IC	-	100	-	mA
Collector Current (Pulse)	IC(P)	-	300	-	mA
Base Current (Continuous)	IB	-	5	-	mA
Power Dissipation	PT	-	300	-	mW
Junction Temperature	TJ	-55	-	150	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Thermal Resistance, Junction to Ambient	R胃JA	-	300	-	K/W

Instructions for Use:

1. Handling:

   • Handle the BC182 with care to avoid damage to the leads or the semiconductor junction.
   • Use proper anti-static precautions to prevent electrostatic discharge (ESD) damage.

2. Mounting:

   • Ensure that the leads are not bent excessively close to the body of the transistor to avoid mechanical stress.
   • Solder the leads quickly to prevent excessive heat from damaging the junction. The maximum soldering temperature is 260掳C for 10 seconds.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table, as this can lead to permanent damage.
   • Ensure that the operating temperature is within the specified range to maintain reliable operation.

4. Biasing:

   • Proper biasing is crucial for the correct operation of the transistor. Use appropriate resistors to set the base current (I_B) to achieve the desired collector current (I_C).

5. Testing:

   • When testing the transistor, use a multimeter to check the continuity between the leads. The base-emitter and base-collector junctions should show forward voltage drops typical of diodes (approximately 0.6V for silicon transistors).
   • Ensure that the collector-emitter path is open when the base is not biased.

6. Storage:

   • Store the BC182 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the transistors in their original packaging until ready for use to protect them from static electricity and physical damage.

7. Applications:

   • The BC182 is suitable for general-purpose amplification and switching applications where low power consumption and moderate current handling are required.
   • It is commonly used in audio amplifiers, signal conditioning circuits, and simple logic gates.

By following these guidelines, you can ensure the reliable and efficient operation of the BC182 transistor in your electronic projects.

(For reference only)