Details

---

BUY JT015N065FED https://www.utsource.net/itm/p/12607035.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Drain-Source Voltage	VDS	-	650	-	V	Maximum voltage between drain and source with gate open
Gate-Source Voltage	VGS	-20	-	20	V	Maximum voltage between gate and source
Continuous Drain Current	ID	-	15	-	A	Continuous current flowing from drain to source at TC = 25°C
Pulse Drain Current	IDpeak	-	45	-	A	Peak current flowing from drain to source (tpulse ≤ 10 μs)
Power Dissipation	PTOT	-	180	-	W	Total power dissipation at TC = 25°C
Junction Temperature	TJ	-	-	175	°C	Maximum junction temperature
Storage Temperature	TSTG	-55	-	150	°C	Operating temperature range for storage and handling
Thermal Resistance	RθJC	-	0.7	-	°C/W	Junction-to-case thermal resistance

Instructions:

1. Handling and Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle the device with care to avoid mechanical damage and static discharge.

2. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified limits.
   • Use appropriate mounting hardware to secure the device firmly to the heatsink.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals correctly to avoid damage.
   • Use suitable wire gauges to handle the current ratings.

4. Operation:

   • Do not exceed the maximum ratings for voltage, current, and power dissipation.
   • Monitor the junction temperature to ensure it does not exceed 175°C.
   • For pulse operation, ensure that the pulse width and frequency do not exceed the specified limits.

5. Testing:

   • Perform initial testing at room temperature to verify correct operation.
   • Gradually increase the load and monitor performance parameters to ensure stability.

6. Safety:

   • Always use protective equipment when handling high-voltage and high-current circuits.
   • Follow all local regulations and guidelines for electrical safety.

7. Troubleshooting:

   • If the device fails to operate correctly, check for proper connections and power supply.
   • Measure the drain-source voltage and current to identify any issues.
   • Consult the datasheet or contact the manufacturer for further assistance.

(For reference only)