Details

---

BUY MIP355 https://www.utsource.net/itm/p/12607040.html

Below is the parameter table and instructions for the MIP355:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	VDD	2.7	-	5.5	V
Operating Current	IOP	-	100	-	渭A
Shutdown Current	ISD	-	0.1	-	渭A
Output Voltage	VOUT	-	3.3	-	V
Output Current	IOUT	-	50	-	mA
Operating Temperature	TOP	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions

1. Power Supply Connection:

   • Connect the supply voltage (V_DD) to the positive terminal of the power source.
   • Connect the ground (GND) to the negative terminal of the power source.

2. Output Configuration:

   • The output voltage (V_OUT) is typically 3.3V. Ensure that the load connected to the output does not exceed the maximum output current (I_OUT) of 50mA.

3. Shutdown Mode:

   • To enter shutdown mode, pull the shutdown pin (SD) low. This will reduce the current consumption to approximately 0.1渭A.
   • To resume normal operation, pull the shutdown pin high or leave it floating.

4. Thermal Considerations:

   • Ensure that the device operates within the specified temperature range (-40掳C to 85掳C).
   • For extended storage, keep the device within the storage temperature range (-65掳C to 150掳C).

5. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use proper ESD protection when handling the device.

6. Mounting and Soldering:

   • Follow recommended soldering profiles to ensure reliable connections.
   • Avoid excessive heat during soldering to prevent damage to the device.

7. Testing:

   • Before final assembly, test the device to ensure it meets the specified parameters.
   • Use a multimeter to verify the output voltage and current.

By following these instructions, you can ensure optimal performance and reliability of the MIP355.

(For reference only)