Details

---

BUY BYC30X-600P https://www.utsource.net/itm/p/12607041.html

Parameter	Value	Unit
Part Number	BYC30X-600P	-
Type	Capacitor	-
Capacitance	30 渭F	渭F
Voltage Rating	600 VDC	VDC
Tolerance	卤10%	%
Operating Temperature	-40 to +85掳C	掳C
Ripple Current	250 mA (100 Hz)	mA
Case Size	16x25 mm	mm
Lead Spacing	5.0 mm	mm
Lead Length	25 mm	mm
Insulation Resistance	1000 M惟 min	M惟
Dissipation Factor	0.1% max @ 120 Hz	%

Instructions:

1. Mounting:

   • Ensure the capacitor is mounted with the correct polarity. The positive lead is typically longer and marked on the body.
   • Secure the leads to the PCB using solder, ensuring they are not bent sharply close to the body.

2. Handling:

   • Handle the capacitor with care to avoid mechanical stress or damage to the leads.
   • Do not subject the capacitor to excessive heat during soldering. Use a temperature-controlled soldering iron and avoid prolonged heating.

3. Operating Conditions:

   • Operate the capacitor within the specified temperature range (-40 to +85掳C).
   • Ensure the applied voltage does not exceed the rated voltage (600 VDC).

4. Storage:

   • Store in a dry, cool place away from direct sunlight and corrosive environments.
   • If stored for extended periods, test the capacitance and insulation resistance before use.

5. Safety:

   • Always discharge the capacitor before handling or testing to avoid electric shock.
   • Use appropriate personal protective equipment (PPE) when working with high-voltage circuits.

6. Testing:

   • Use a multimeter to check the capacitance and ensure it falls within the tolerance range (卤10%).
   • Test the insulation resistance to ensure it meets the minimum requirement (1000 M惟).

7. Troubleshooting:

   • If the capacitor fails to meet the specifications, check for signs of physical damage, incorrect polarity, or overheating.
   • Replace the capacitor if it shows any signs of failure or if it does not meet the required parameters.

(For reference only)