Details

---

BUY AZ23C18_R1_00001 https://www.utsource.net/itm/p/12607043.html

Below is the parameter table and instructions for the AZ23C18_R1_00001 component:

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit	Description
Operating Voltage	Vop	1.8	-	5.5	V	Range of supply voltage
Quiescent Current	Iq	-	1.5	2.0	渭A	Current consumption when active
Output Current	Iout	0	-	50	mA	Maximum continuous output current
Dropout Voltage	Vdo	-	0.2	0.5	V	Voltage difference between input and output
Thermal Shutdown	Tshdn	-	150	-	掳C	Temperature at which the device shuts down
Storage Temperature	Tstg	-40	-	85	掳C	Temperature range for storage
Operating Temperature	Top	-40	-	85	掳C	Temperature range for operation

Instructions

1. Power Supply:

   • Ensure the operating voltage (V_op) is within the range of 1.8V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect performance.

2. Current Handling:

   • The maximum continuous output current (I_out) is 50mA. Do not exceed this limit to prevent damage to the component.
   • If higher currents are required, consider using external transistors or other current-boosting circuits.

3. Thermal Management:

   • The device will automatically shut down if the temperature exceeds 150掳C (T_shdn).
   • Ensure adequate heat dissipation by mounting the component on a heatsink or providing sufficient airflow.

4. Operating Conditions:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C (T_op).
   • Store the component in a dry environment within the temperature range of -40掳C to 85掳C (T_stg).

5. Dropout Voltage:

   • The dropout voltage (V_do) is typically 0.2V and can go up to 0.5V.
   • Ensure the input voltage is at least 0.5V higher than the desired output voltage to maintain regulation.

6. Quiescent Current:

   • The quiescent current (I_q) is typically 1.5渭A and can go up to 2.0渭A.
   • This low current consumption makes the device suitable for battery-powered applications.

7. Handling and Storage:

   • Handle the component with care to avoid static damage.
   • Store in a dry, cool place to prevent moisture-related issues.

By following these parameters and instructions, you can ensure optimal performance and longevity of the AZ23C18_R1_00001 component.

(For reference only)