Details

---

BUY SIHG73N60E https://www.utsource.net/itm/p/12607061.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Drain-Source On-State Resistance	RDS(on)	-	180	-	m惟	VGS = 10V, ID = 25A, Tj = 25掳C
Drain-Source Breakdown Voltage	VDS(BR)	-	600	-	V	ID = 250渭A, Tj = 25掳C
Gate-Source Threshold Voltage	VGS(th)	2.0	4.0	6.0	V	ID = 250渭A, Tj = 25掳C
Input Capacitance	Ciss	-	1900	-	pF	VDS = 400V, f = 1MHz, Tj = 25掳C
Output Capacitance	Coss	-	250	-	pF	VDS = 400V, f = 1MHz, Tj = 25掳C
Reverse Transfer Capacitance	Crss	-	280	-	pF	VDS = 400V, f = 1MHz, Tj = 25掳C
Continuous Drain Current	ID	-	25	-	A	VDS = 400V, TC = 25掳C
Pulse Drain Current	ID(pk)	-	75	-	A	VDS = 400V, tp = 10ms, Tj = 25掳C
Total Power Dissipation	PTOT	-	200	-	W	TC = 25掳C
Junction Temperature	Tj	-	-	150	掳C	-
Storage Temperature Range	Tstg	-55	-	150	掳C	-

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid static damage. Use ESD protection when handling.

2. Mounting:

   • Ensure proper heat sinking to manage thermal resistance.
   • Use appropriate mounting torque for screws to ensure good thermal contact.

3. Biasing:

   • Apply gate-source voltage (V_GS) within the specified range to avoid damage.
   • Ensure V_GS is not less than the threshold voltage (V_GS(th)) to turn on the device.

4. Operation:

   • Do not exceed the maximum drain-source voltage (V_DS(BR)) to prevent breakdown.
   • Keep the junction temperature (T_j) below the maximum rating to avoid thermal damage.
   • Operate within the continuous drain current (I_D) limits to ensure reliable performance.

5. Testing:

   • Use a suitable test setup to measure parameters accurately.
   • Ensure all connections are secure and insulated to prevent short circuits.

6. Safety:

   • Follow all safety guidelines and regulations when working with high voltages and currents.
   • Use appropriate personal protective equipment (PPE) as necessary.

For detailed specifications and further information, refer to the datasheet provided by the manufacturer.

(For reference only)