Details

---

BUY CSR8670CG https://www.utsource.net/itm/p/12607066.html

Parameter	Description
Part Number	CSR8670CG
Package Type	QFN
Pin Count	56
Operating Voltage	1.71 V to 3.6 V
Operating Temperature	-40掳C to +85掳C
RF Frequency	2.4 GHz ISM band
Communication Interface	UART, SPI, I2C, PCM
Memory	256 KB Flash, 64 KB RAM
Audio Codec	Supports A2DP, AVRCP, HFP, HSP
Bluetooth Version	Bluetooth v4.1
Certification	FCC, CE, IC

Instructions for Use

1. Power Supply:

   • Ensure the operating voltage is within the range of 1.71 V to 3.6 V.
   • Connect the power supply pins (VDD) to a stable power source and ground (GND) to a common ground.

2. Reset Pin:

   • The reset pin (RST) should be pulled high for normal operation. Pulling it low will reset the device.

3. Communication Interfaces:

   • Configure the desired communication interface (UART, SPI, I2C, or PCM) as per your application requirements.
   • Refer to the datasheet for specific pin configurations and protocol settings.

4. Antenna Connection:

   • Connect an appropriate antenna to the designated RF output pin to ensure optimal wireless performance.

5. Audio Configuration:

   • Utilize the supported Bluetooth profiles (A2DP, AVRCP, HFP, HSP) for various audio functionalities.
   • Configure the audio codec settings via the provided software or through hardware jumpers if available.

6. Firmware Update:

   • For updating the firmware, use the provided USB bootloader or over-the-air (OTA) update methods.
   • Follow the detailed steps in the firmware update guide included in the product documentation.

7. Regulatory Compliance:

   • Ensure that all deployments comply with local regulations such as FCC, CE, and IC standards.

For more detailed information, refer to the official CSR8670CG datasheet and application notes.

(For reference only)