Details

---

BUY QD9619A https://www.utsource.net/itm/p/12607067.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.7	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Quiescent Current	IQ	-	10	-	渭A	Quiescent current at no load
Dropout Voltage	VDROPOUT	-	200	-	mV	Typical dropout voltage at full load
Load Regulation	-	-	0.5	-	%	Change in output voltage with load
Line Regulation	-	-	0.2	-	%	Change in output voltage with VIN
PSRR (Power Supply Rejection Ratio)	-	-	60	-	dB @ 1kHz	Ability to reject ripple from VIN
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range

Instructions for QD9619A

1. Installation:

   • Ensure the input voltage is within the specified range of 2.7V to 5.5V.
   • Connect the input voltage to the VIN pin and ground to the GND pin.
   • Connect the load to the VOUT pin and ensure it does not exceed the maximum allowable current.

2. Operation:

   • The device will regulate the output voltage to a fixed 3.3V, regardless of changes in input voltage or load conditions.
   • Monitor the quiescent current, which should remain around 10渭A under no-load conditions.

3. Performance Monitoring:

   • Regularly check the dropout voltage to ensure it remains around 200mV at full load.
   • Verify load and line regulation to ensure stability in output voltage.
   • Test the PSRR to confirm effective suppression of input voltage ripple.

4. Environmental Considerations:

   • Ensure the operating temperature stays within -40掳C to 85掳C for optimal performance.

5. Safety Precautions:

   • Do not exceed the maximum ratings as specified in the datasheet.
   • Use appropriate heat sinking if operating near the upper temperature limit.

(For reference only)