Details

---

BUY SRD-03VDC-SL-C https://www.utsource.net/itm/p/12607079.html

Parameter	Description	Value
Type	Relay Type	SPDT
Model	Model Number	SRD-03VDC-SL-C
Coil Voltage	Operating Voltage of Coil	3 VDC
Coil Current	Operating Current of Coil	94 mA
Contact Form	Contact Configuration	SPDT (Single Pole Double Throw)
Contact Rating	Maximum Switching Capacity	10A, 250VAC / 30VDC
Insulation Resistance	Between Terminals	100 M惟 min.
Dielectric Strength	Between Terminals	1500 VAC for 1 minute
Mechanical Life	Operation Cycles	10 million operations
Electrical Life	Operation Cycles with Load	100,000 operations
Operating Temperature	Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +85掳C
Weight	Weight	6 g
Dimensions	Dimensions (L x W x H)	17.5 x 12.2 x 11.1 mm

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat surface.
   • Use appropriate screws or clips to secure the relay in place.

2. Wiring:

   • Connect the coil terminals to the control circuit using wires suitable for the current and voltage ratings.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load circuit according to your application needs.

3. Power Supply:

   • Apply the specified coil voltage (3 VDC) to activate the relay.
   • Ensure the power supply is stable and within the rated voltage range to avoid damage.

4. Operation:

   • The relay can switch loads up to its contact rating (10A, 250VAC / 30VDC).
   • Avoid exceeding the maximum switching capacity to prevent premature failure.

5. Maintenance:

   • Regularly inspect connections for corrosion or loose fittings.
   • Ensure the operating environment remains within the specified temperature range.

6. Safety:

   • Do not exceed the electrical ratings to prevent fire or electric shock.
   • Handle the relay with care to avoid physical damage.

(For reference only)