Details

---

BUY 56ND12-W1 https://www.utsource.net/itm/p/12607081.html

Parameter	Description	Value
Part Number	Unique identifier for the component	56ND12-W1
Type	Component type	Capacitor
Technology	Capacitor technology	Tantalum
Capacitance	Nominal capacitance	12 渭F
Voltage Rating	Maximum DC voltage	35 V
Tolerance	Capacitance tolerance	卤20%
Operating Temp.	Temperature range	-55掳C to +85掳C
Case Size	Physical dimensions of the component	EIA 3216-18
Lead Spacing	Distance between leads	2.5 mm
Lead Diameter	Diameter of the leads	0.6 mm
Mounting Style	Method of mounting the component	Radial
Insulation	Dielectric material	Tantalum Oxide
ESR (Max)	Equivalent Series Resistance	0.4 惟
ESL (Typical)	Equivalent Series Inductance	1.5 nH
DF (Dissipation Factor)	Loss tangent at 120 Hz	0.02
Moisture Sensitivity	MSL level for handling and storage	Level 1

Instructions for Use:

1. Handling:

   • Handle the capacitor with care to avoid mechanical damage.
   • Avoid touching the leads directly to prevent contamination.

2. Mounting:

   • Ensure the correct polarity is observed during installation.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.
   • Allow the solder to cool naturally without applying additional stress to the component.

3. Storage:

   • Store in a dry environment to prevent moisture absorption.
   • Follow the recommended storage conditions to maintain performance.

4. Operation:

   • Do not exceed the rated voltage or operating temperature.
   • Regularly inspect the capacitor for signs of physical damage or failure.

5. Testing:

   • Use a capacitance meter to verify the capacitance value.
   • Check the ESR and ESL if required for circuit design validation.

6. Disposal:

   • Follow local regulations for the disposal of electronic components.
   • Recycle or dispose of the capacitor responsibly.

(For reference only)