Details

---

BUY G8P-1A4P-12VDC https://www.utsource.net/itm/p/12607088.html

Parameter	Value
Type	Relay
Model	G8P-1A4P-12VDC
Coil Voltage	12V DC
Coil Power Consumption	0.5W (Typical)
Coil Resistance	240惟 (Typical)
Contact Form	SPDT (Single Pole Double Throw)
Number of Poles	1
Contact Rating	10A at 250V AC / 30V DC
Insulation Resistance	100M惟 (Min)
Dielectric Strength	1000V AC for 1 minute
Operating Temperature	-40掳C to +85掳C
Storage Temperature	-40掳C to +125掳C
Mechanical Life	10 million operations
Electrical Life	100,000 operations (Resistive Load)
Weight	15g (Approx.)

Instructions:

1. Installation:

   • Ensure the relay is installed in a well-ventilated area to prevent overheating.
   • Mount the relay on a flat, stable surface to avoid mechanical stress.

2. Wiring:

   • Connect the coil terminals to the 12V DC power supply.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the circuit as required.
   • Use appropriate wire gauges to handle the current ratings of the contacts.

3. Operation:

   • When the coil is energized, the normally open (NO) contact will close, and the normally closed (NC) contact will open.
   • When the coil is de-energized, the contacts will return to their default positions.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry, lint-free cloth if necessary.
   • Do not use abrasive materials or solvents that could damage the relay.

5. Safety:

   • Always disconnect the power supply before performing any maintenance or wiring changes.
   • Ensure the relay is used within its specified operating parameters to avoid damage or failure.
   • Follow all local electrical codes and regulations when installing and using the relay.

(For reference only)