Details
BUY ST02D-170F2 https://www.utsource.net/itm/p/12607097.html
| Parameter | Description | Value |
|---|---|---|
| Part Number | Full part number | ST02D-170F2 |
| Type | Type of device | SCR (Silicon Controlled Rectifier) |
| VDRM (Repetitive Peak Off-State Voltage) | Maximum repetitive peak off-state voltage | 600 V |
| ITRM (Repetitive Peak On-State Current) | Maximum repetitive peak on-state current | 17 A |
| IH (Holding Current) | Minimum holding current | 5 mA |
| IT(AV) (Non-Repetitive Average On-State Current) | Non-repetitive average on-state current | 50 A (10 ms pulse) |
| Package | Package type | TO-220 |
| Operating Temperature Range | Operating temperature range | -40掳C to +125掳C |
| Storage Temperature Range | Storage temperature range | -55掳C to +150掳C |
| Mounting Type | Method of mounting | Through-hole |
Instructions for Use:
- Handling Precautions: Handle with care to avoid damage to the leads and body. Avoid exposure to high temperatures or corrosive environments.
- Installation: Ensure proper alignment of the component during installation. Apply sufficient heat sink compound if used with a heatsink to ensure good thermal contact.
- Soldering: Solder within recommended temperature and time limits to prevent thermal damage. Recommended soldering temperature is 260掳C for no more than 10 seconds.
- Circuit Design: Ensure that the circuit design does not exceed the maximum ratings specified in the table. Pay special attention to the VDRM and ITRM parameters.
- Testing: Before final assembly, test the SCR in a controlled environment to verify its performance and functionality.
- Storage: Store in a dry, cool place away from direct sunlight and sources of heat. Follow the storage temperature guidelines to maintain component integrity.
View more about ST02D-170F2 on main site