Details

---

BUY MR2404 https://www.utsource.net/itm/p/12607099.html

Parameter	Description	Value
Part Number	Component Identifier	MR2404
Type	Component Type	RF Mixer
Frequency Range	Operating Frequency	50 MHz to 4 GHz
Conversion Loss	Signal Loss During Conversion	6.5 dB (Typical)
Isolation	Isolation Between Ports	30 dB (Minimum)
Input IP3	Third-Order Intercept Point	+22 dBm (Minimum)
Input Return Loss	Reflection Loss at Input Port	15 dB (Minimum)
Output Return Loss	Reflection Loss at Output Port	15 dB (Minimum)
LO Drive Level	Local Oscillator Drive Level	+7 dBm (Typical)
Power Supply	Supply Voltage	3.3 V to 5.5 V
Supply Current	Current Consumption	40 mA (Maximum)
Package	Physical Package	SOT-89-5
Operating Temperature	Temperature Range	-40掳C to +85掳C

Instructions for Use:

1. Power Supply:

   • Ensure the power supply voltage is within the range of 3.3 V to 5.5 V.
   • Use a stable and clean power source to avoid noise and instability.

2. Biasing:

   • Connect the power supply to the Vcc pin and ground to the GND pin.
   • Ensure proper decoupling capacitors (e.g., 10 nF and 10 渭F) are placed close to the Vcc and GND pins to filter out high-frequency noise.

3. RF Connections:

   • Connect the RF input signal to the RF/LO port.
   • Connect the local oscillator (LO) signal to the LO port.
   • The mixed output will be available at the IF port.

4. Matching Networks:

   • Use appropriate matching networks to achieve optimal performance, especially for input and output return loss.
   • Refer to the datasheet for recommended matching circuits.

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C to ensure reliable performance.
   • Avoid exposing the device to extreme temperatures or rapid temperature changes.

6. Handling:

   • Handle the device with care to avoid damage to the pins and package.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling the device.

7. Testing:

   • Use a spectrum analyzer or similar equipment to verify the performance parameters such as conversion loss, isolation, and IP3.
   • Test the device under various operating conditions to ensure it meets the required specifications.

8. Storage:

   • Store the device in a dry, cool place to prevent moisture and corrosion.
   • Keep the device in its original packaging until ready for use.

(For reference only)