Details

---

BUY OZ-SS-112L1 https://www.utsource.net/itm/p/12607105.html

Parameter	Description
Part Number	OZ-SS-112L1
Type	Surface Mount Optocoupler
Package	SOP-4
Isolation Voltage	5000 Vrms (Min)
Input Current	10 mA (Typ)
Output Current	50 mA (Max)
Forward Voltage	1.2 V (Max) at IF = 20 mA
Reverse Voltage	7 V (Max)
Output Voltage	30 V (Max)
**Operating Temperature	-40掳C to +110掳C
Storage Temperature	-55掳C to +150掳C
Rise Time	2 渭s (Max)
Fall Time	2 渭s (Max)
CTR (Current Transfer Ratio)	50% to 300% at IF = 5 mA, VCE = 5 V

Instructions for Use

1. Mounting:

   • Ensure that the device is mounted on a clean, flat surface.
   • Use appropriate soldering techniques to avoid thermal shock and mechanical stress.

2. Handling:

   • Handle the device with care to prevent damage to the leads or body.
   • Avoid exposing the device to excessive static electricity.

3. Electrical Connections:

   • Connect the input side (LED) to the control circuit.
   • Connect the output side (phototransistor) to the load circuit.
   • Ensure that the voltage and current ratings are not exceeded.

4. Thermal Management:

   • Provide adequate heat sinking if the device will be operating at high temperatures or high currents.
   • Ensure that the ambient temperature does not exceed the maximum operating temperature.

5. Testing:

   • Test the device under controlled conditions to ensure proper functionality.
   • Verify the CTR (Current Transfer Ratio) and other electrical parameters as specified.

6. Storage:

   • Store the device in a dry, cool place away from direct sunlight and corrosive substances.
   • Follow the recommended storage temperature range to maintain device integrity.

7. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)