Details

---

BUY 2SK2718. https://www.utsource.net/itm/p/12607114.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Drain-Source Voltage	V(DS)	-	500	-	V
Gate-Source Voltage	V(GS)	-20	-	20	V
Drain Current	I(D)	-	10	-	A	Continuous, Tc = 25掳C
Pulse Drain Current	I(DP)	-	30	-	A	t(p) = 10 渭s, I(GS) = 0
Power Dissipation	P(T)	-	150	-	W	Tc = 25掳C
Junction Temperature	T(j)	-	-	150	掳C
Thermal Resistance	R(胃jc)	-	1.0	-	掳C/W	Junction to Case
Input Capacitance	Ciss	-	4600	-	pF	V(DS) = 25V, f = 1 MHz
Output Capacitance	Coss	-	2200	-	pF	V(DS) = 25V, f = 1 MHz
Reverse Transfer Capacitance	Crss	-	1400	-	pF	V(DS) = 25V, f = 1 MHz
Threshold Voltage	Vth	2	4	6	V	I(D) = 1 mA, I(G) = 10 mA
On-State Resistance	R(DS(on))	-	0.5	-	惟	V(GS) = 15V, I(D) = 10A

Instructions for Use:

1. Handling Precautions:

   • The 2SK2718 is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Avoid exceeding the maximum ratings specified in the table to prevent damage to the device.

2. Mounting:

   • Ensure good thermal management by using a heatsink if necessary, especially when operating at high power levels.
   • Tighten the mounting screws securely but do not exceed the recommended torque to avoid damaging the package.

3. Biasing:

   • Apply the gate-source voltage (V(GS)) carefully to ensure it remains within the specified range to avoid gate oxide breakdown.
   • Use appropriate gate drive circuits to control the turn-on and turn-off times, minimizing switching losses.

4. Operating Conditions:

   • Monitor the junction temperature (T(j)) to ensure it does not exceed 150掳C, as this can lead to premature failure.
   • Ensure that the drain current (I(D)) and power dissipation (P(T)) are within safe limits, especially under continuous operation.

5. Testing:

   • When testing the device, use a controlled environment to accurately measure parameters such as threshold voltage (Vth) and on-state resistance (R(DS(on))).
   • Use a low-inductance test setup to minimize the effects of parasitic inductances, which can cause false readings or damage the device.

6. Storage:

   • Store the 2SK2718 in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect it from moisture and physical damage.

By following these guidelines, you can ensure reliable and efficient operation of the 2SK2718 in your applications.

(For reference only)