Details

---

BUY BCX70H,215 SOT-23 https://www.utsource.net/itm/p/12607118.html

Parameter	Symbol	Min	Typical	Max	Unit	Conditions
Collector-Emitter Voltage	VCEO	-	-	45	V	TA = 25掳C
Collector-Base Voltage	VCBO	-	-	50	V	TA = 25掳C
Emitter-Base Voltage	VEBO	-	-	5	V	TA = 25掳C
Collector Current	IC	-	-	200	mA	TA = 25掳C
Base Current	IB	-	-	20	mA	TA = 25掳C
Continuous Power Dissipation	PTOT	-	-	350	mW	TA = 25掳C
Storage Temperature Range	TSTG	-65	-	150	掳C	-
Operating Junction Temperature	TJ	-65	-	150	掳C	-
Forward Current Transfer Ratio	hFE	100	300	800	-	IC = 10 mA, VCE = 5 V
Collector-Emitter Saturation Voltage	VCE(sat)	-	0.2	0.4	V	IC = 10 mA, IB = 1 mA
Base-Emitter Saturation Voltage	VBE(sat)	-	0.7	0.9	V	IC = 10 mA, IB = 1 mA
Transition Frequency	fT	-	300	-	MHz	IC = 10 mA, VCE = 5 V

Instructions for Use:

1. Handling Precautions:

   • Handle the BCX70H,215 SOT-23 with care to avoid static damage.
   • Ensure that all tools and equipment are grounded before handling the device.

2. Mounting:

   • Use a soldering iron with a temperature setting no higher than 300掳C.
   • The soldering time should not exceed 5 seconds per connection.
   • Avoid applying excessive mechanical stress to the leads during soldering.

3. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and static.

4. Operating Conditions:

   • Ensure that the operating conditions (voltage, current, and temperature) do not exceed the maximum ratings provided in the table.
   • For optimal performance, operate the device within the recommended operating conditions.

5. Testing:

   • Use appropriate test equipment to verify the parameters of the device.
   • Follow the test conditions specified in the table for accurate measurements.

6. Schematic Design:

   • Ensure that the device is properly decoupled with capacitors to reduce noise and improve stability.
   • Use proper layout techniques to minimize parasitic inductance and capacitance.

7. Safety:

   • Always follow safety guidelines when working with electrical components.
   • Use appropriate personal protective equipment (PPE) when handling the device.

(For reference only)