Details

---

BUY EE-SX3081 https://www.utsource.net/itm/p/12607127.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Operating Voltage	VCC	Continuous operation	4.5	-	24	V
Operating Current	ICC	Continuous operation	-	10	-	mA
Output Type			-	NPN Open Collector	-	-
Maximum Load Current	IOL	VCE = 30V, TA = 25掳C	-	-	50	mA
Maximum Collector-Emitter Voltage	VCE	Continuous operation	-	-	30	V
Maximum Emitter-Base Voltage	VEB	Continuous operation	-	-	5	V
Maximum Junction Temperature	TJ	Continuous operation	-	-	125	掳C
Storage Temperature Range	TSTG	Non-operating	-40	-	85	掳C
Response Time (ON)	tr	VCC = 24V, RL = 1k惟	-	0.5	-	ms
Response Time (OFF)	tf	VCC = 24V, RL = 1k惟	-	0.5	-	ms

Instructions for Use:

1. Power Supply:

   • Ensure the operating voltage is within the range of 4.5V to 24V.
   • The typical operating current is 10mA.

2. Output Configuration:

   • The EE-SX3081 has an NPN open collector output.
   • Connect an external pull-up resistor between the output and the supply voltage to ensure proper operation.

3. Load Current:

   • Do not exceed the maximum load current of 50mA to avoid damaging the device.
   • Ensure the load resistance is appropriate for the desired current.

4. Voltage Ratings:

   • The maximum collector-emitter voltage (V_CE) should not exceed 30V.
   • The maximum emitter-base voltage (V_EB) should not exceed 5V.

5. Temperature Considerations:

   • The maximum junction temperature (T_J) should not exceed 125掳C.
   • Store the device in an environment where the temperature ranges from -40掳C to 85掳C.

6. Response Time:

   • The typical response time for both ON and OFF states is 0.5ms when using a 24V supply and a 1k惟 load resistor.

7. Handling:

   • Handle the device with care to avoid static damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

8. Mounting:

   • Ensure proper mounting to maintain thermal performance and mechanical stability.
   • Use appropriate fasteners and follow the recommended torque values if applicable.

9. Testing:

   • Test the device under the specified operating conditions to ensure it meets the required performance specifications.

10. Compliance:

    • Ensure the device complies with all relevant safety and regulatory standards for your application.

(For reference only)