Details

---

BUY SFH611 https://www.utsource.net/itm/p/12607150.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Forward Current	IF	-	50	100	mA	Maximum continuous forward current
Peak Forward Current	IF(P)	-	-	200	mA	Maximum peak forward current (10 渭s pulse width)
Reverse Voltage	VR	-	-	5	V	Maximum reverse voltage
Forward Voltage	VF	1.2	1.6	2.0	V @ IF=20mA	Typical forward voltage at 20 mA
Reverse Current	IR	-	100	500	nA @ VR=5V	Reverse current at 5 V
Spectral Range	位	850	870	900	nm	Emission wavelength range
Viewing Angle	胃	20	45	60	掳	Half-intensity angle
Operating Temperature	T(op)	-40	25	85	掳C	Operating temperature range
Storage Temperature	T(stg)	-40	-	100	掳C	Storage temperature range

Instructions for Use:

1. Mounting:

   • Ensure that the mounting surface is clean and flat.
   • Use appropriate mounting techniques to avoid mechanical stress on the component.

2. Soldering:

   • Preheat the component and the PCB to reduce thermal shock.
   • Soldering temperature should not exceed 260掳C.
   • Soldering time should be limited to 10 seconds per joint.

3. Electrical Connection:

   • Connect the anode to the positive terminal and the cathode to the negative terminal.
   • Use a current-limiting resistor to ensure the forward current does not exceed the maximum rating.

4. Handling:

   • Handle with care to avoid damage to the leads or the body.
   • Use anti-static precautions to prevent electrostatic discharge damage.

5. Environmental Considerations:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive gases and high humidity.

6. Testing:

   • Test the component under controlled conditions to ensure it meets the specified parameters.
   • Use a multimeter or an appropriate testing device to measure forward voltage and current.

7. Disposal:

   • Dispose of the component according to local environmental regulations.
   • Do not incinerate or dispose of in household waste.

(For reference only)