Details

---

BUY BMS3004-1E https://www.utsource.net/itm/p/12607171.html

Parameter	Description
Part Number	BMS3004-1E
Type	Battery Management System (BMS)
Number of Cells	4
Cell Chemistry	Lithium-ion (Li-ion)
Voltage Range	2.5V to 4.2V per cell
Total Voltage Range	10V to 16.8V
Maximum Continuous Current	30A (continuous), 50A (peak for 10 seconds)
Protection Features	Overcharge, Overdischarge, Overcurrent, Short Circuit, Cell Imbalance
Communication Interface	CAN Bus (Controller Area Network)
Operating Temperature	-20掳C to +60掳C
Storage Temperature	-40掳C to +85掳C
Dimensions (L x W x H)	100mm x 50mm x 15mm
Weight	100g
Certifications	CE, UL, RoHS

Instructions

1. Installation:

   • Ensure the BMS is installed in a dry, well-ventilated area.
   • Connect the battery cells in series to the BMS terminals.
   • Connect the load and charger to the BMS output terminals.
   • Verify all connections are secure and correct before powering on.

2. Configuration:

   • Use the provided CAN Bus interface to configure the BMS settings.
   • Set the desired voltage thresholds, current limits, and other parameters as needed.
   • Refer to the user manual for detailed configuration steps.

3. Operation:

   • Power on the system and monitor the BMS status through the CAN Bus interface.
   • The BMS will automatically protect the battery from overcharge, overdischarge, overcurrent, short circuit, and cell imbalance.
   • Regularly check the battery and BMS for any signs of damage or malfunction.

4. Maintenance:

   • Perform routine checks to ensure all connections are tight and secure.
   • Clean the BMS and surrounding area to prevent dust and debris buildup.
   • Replace any damaged components immediately to avoid system failure.

5. Troubleshooting:

   • If the BMS does not power on, check the power supply and connections.
   • If the BMS reports errors, refer to the error codes in the user manual for troubleshooting.
   • Contact technical support for assistance with complex issues.

(For reference only)