Details

---

BUY S10VB60 07 https://www.utsource.net/itm/p/12607176.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	V_IN	4.5	-	60	V
Output Voltage	V_OUT	-	5	-	V	Fixed
Output Current	I_OUT	-	1	1.2	A
Efficiency	畏	-	85	-	%
Switching Frequency	f_SW	-	500	-	kHz
Quiescent Current	I_Q	-	20	-	渭A
Dropout Voltage	V_DROPOUT	-	0.7	-	V
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_STG	-55	-	125	掳C

Instructions for Use:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 4.5V to 60V.
   • Do not exceed the maximum input voltage to avoid damage to the device.

2. Output Voltage (V_OUT):

   • The output voltage is fixed at 5V. No external components are required to set this voltage.

3. Output Current (I_OUT):

   • The device can provide up to 1.2A of output current, with a typical output current of 1A.
   • Ensure the load does not exceed the maximum output current to prevent overheating or damage.

4. Efficiency (畏):

   • The efficiency is typically around 85%. This value can vary depending on the input voltage and load conditions.

5. Switching Frequency (f_SW):

   • The switching frequency is fixed at 500kHz. This helps in minimizing the size of external components like inductors and capacitors.

6. Quiescent Current (I_Q):

   • The quiescent current is typically 20渭A. This low current consumption makes the device suitable for battery-powered applications.

7. Dropout Voltage (V_DROPOUT):

   • The dropout voltage is 0.7V. This means the input voltage must be at least 0.7V higher than the output voltage for the regulator to function properly.

8. Operating Temperature (T_OP):

   • The device can operate within a temperature range of -40掳C to 85掳C. Ensure the ambient temperature stays within this range to maintain reliable operation.

9. Storage Temperature (T_STG):

   • The device can be stored within a temperature range of -55掳C to 125掳C. However, ensure it is brought back to operating temperature before use.

10. Mounting and Handling:

    • Handle the device with care to avoid static discharge and physical damage.
    • Follow proper soldering techniques to ensure a secure and reliable connection.

11. Capacitor Selection:

    • Use high-quality ceramic capacitors for input and output filtering to ensure stable operation.
    • Typical values for input and output capacitors are 10渭F and 10渭F, respectively.

12. Inductor Selection:

    • Choose an inductor with a saturation current rating higher than the maximum output current.
    • A typical inductor value is 10渭H.

13. PCB Layout:

    • Keep the input and output capacitors close to the device to minimize noise and improve stability.
    • Use wide traces for power connections to reduce resistance and heat generation.

By following these instructions, you can ensure optimal performance and reliability of the S10VB60 07.

(For reference only)