Details

---

BUY AME8520AEEVEFE29 https://www.utsource.net/itm/p/12607179.html

Parameter	Description	Value
Part Number	Full Part Number	AME8520AEEVEFE29
Package Type	Package Style	TSSOP-16
Operating Voltage (Vcc)	Supply Voltage Range	4.5V to 5.5V
Operating Temperature	Operating Temperature Range	-40掳C to 85掳C
Storage Temperature	Storage Temperature Range	-65掳C to 150掳C
Input Voltage (Vin)	Maximum Input Voltage	5.5V
Output Current (Iout)	Maximum Continuous Output Current	1.5A
Quiescent Current (Iq)	Quiescent Current at No Load	100渭A
Dropout Voltage (Vdo)	Dropout Voltage at 1.5A	0.3V
PSRR (Power Supply Rejection Ratio)	PSRR at 1kHz	70dB
Ripple Rejection	Ripple Rejection at 100kHz	50dB
Thermal Resistance (胃JA)	Junction-to-Ambient Thermal Resistance	50掳C/W
ESD Rating	Human Body Model (HBM)	4kV
Mounting Type	Surface Mount Technology (SMT)	Yes
Lead Finish	Lead Finish	Matte Tin
RoHS Compliance	RoHS Compliant	Yes

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage (Vin) to the Vcc pin.
   • Ensure the input voltage is within the specified range (4.5V to 5.5V).
   • Connect the ground (GND) pin to the common ground.

2. Output Configuration:

   • Connect the load to the output (Vout) pin.
   • Ensure the load current does not exceed the maximum continuous output current (1.5A).

3. Decoupling Capacitors:

   • Place a 10渭F ceramic capacitor between the Vcc and GND pins as close to the device as possible.
   • Place a 100nF ceramic capacitor between the Vout and GND pins to stabilize the output.

4. Thermal Management:

   • Ensure adequate heat dissipation by using a heatsink or PCB with sufficient copper area.
   • The thermal resistance (胃JA) is 50掳C/W, so consider the power dissipation when designing the layout.

5. Handling Precautions:

   • Handle the device with care to avoid ESD damage.
   • Use proper ESD protection equipment and follow standard ESD handling procedures.

6. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range (-65掳C to 150掳C).

7. Testing:

   • Before final assembly, test the device under typical operating conditions to ensure it meets the required specifications.

8. Compliance:

   • Ensure that the device is used in compliance with all relevant safety and environmental regulations.

(For reference only)