Details

---

BUY EP8200-HL https://www.utsource.net/itm/p/12607180.html

Below is the parameter table and instructions for the EP8200-HL electronic component.

EP8200-HL Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	3.0	5.0	5.5	V
Operating Temperature	Ta	-40	25	85	掳C
Storage Temperature	Tstg	-55	-	125	掳C
Output Current	Iout	-	100	200	mA
Quiescent Current	Iq	-	1.5	2.0	mA
Output Voltage Range	Vout	1.2	3.3	5.0	V
Input Voltage Range	Vin	3.0	5.0	5.5	V
Frequency Response	fresp	-	100	150	kHz
Power Dissipation	Pd	-	1.0	1.5	W
Thermal Resistance	R胃ja	-	65	80	掳C/W

EP8200-HL Instructions

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vcc pin.
   • Connect the negative terminal (GND) to the GND pin.

2. Output Configuration:

   • Connect the load to the Vout pin.
   • Ensure the load current does not exceed the maximum output current (200 mA).

3. Thermal Management:

   • Place the component on a PCB with adequate copper area for heat dissipation.
   • If operating at high temperatures or high power levels, consider using a heatsink.

4. Stability and Filtering:

   • Use appropriate capacitors for input and output filtering to ensure stability.
   • Recommended values:
     • Input Capacitor (Cin): 10 渭F (X7R, 10V)
     • Output Capacitor (Cout): 10 渭F (X7R, 10V)

5. Frequency Response:

   • The component operates within a frequency range of 100 kHz to 150 kHz.
   • For optimal performance, ensure the load and input conditions are within the specified range.

6. Storage and Handling:

   • Store the component in a dry environment within the temperature range of -55掳C to 125掳C.
   • Handle with care to avoid static discharge and physical damage.

7. Testing and Troubleshooting:

   • Before final assembly, test the component under typical operating conditions.
   • Check for proper connections and ensure the supply voltage is within the specified range.
   • If the output voltage is unstable, check the input and output capacitors.

8. Compliance:

   • Ensure the component complies with all relevant safety and regulatory standards for your application.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)