Details

---

BUY LM431AIZ/NOPB https://www.utsource.net/itm/p/12607201.html

Parameter	Symbol	Min	Typ	Max	Unit
Reference Voltage	Vref	2.495	2.500	2.505	V
Operating Current	Iop	-	0.4	1.0	mA
Output Current	Iout	0.0	15.0	100.0	mA
Power Dissipation	Pd	-	-	750	mW
Junction Temperature Range	Tj	-40	-	125	掳C
Storage Temperature Range	Tstg	-65	-	150	掳C
Thermal Resistance (Junction to Ambient)	R胃ja	-	-	220	掳C/W

Instructions for Use:

1. Power Supply:

   • Ensure that the supply voltage is within the specified range to avoid damage to the device.
   • The LM431AIZ/NOPB can operate with a wide range of supply voltages, but it is typically used in circuits where the supply voltage is at least 3V above the reference voltage.

2. Reference Voltage:

   • The reference voltage (Vref) is typically 2.5V. This value is highly stable and accurate, making it suitable for precision applications.
   • Use external resistors to set the desired output voltage based on the reference voltage.

3. Output Current:

   • The device can source up to 100mA of current. However, for optimal performance and to avoid overheating, it is recommended to keep the output current below 15mA.
   • If higher currents are required, consider using a power transistor or other amplification methods.

4. Thermal Management:

   • The thermal resistance (R胃ja) of the device is 220掳C/W. Ensure adequate heat sinking if the device will be operating at high power dissipation levels.
   • Monitor the junction temperature (Tj) to ensure it stays within the -40掳C to 125掳C range.

5. Storage and Handling:

   • Store the device in a dry, cool environment to prevent damage from moisture and temperature extremes.
   • Handle the device with care to avoid static discharge, which can damage the internal components.

6. Circuit Design:

   • When designing circuits, ensure that the feedback loop is stable to avoid oscillations.
   • Use bypass capacitors to filter out noise and provide a stable supply voltage.

7. Package Information:

   • The LM431AIZ/NOPB is available in a TO-92 package.
   • Follow the recommended PCB layout guidelines to ensure proper thermal management and electrical performance.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications.
   • Use a multimeter to verify the output voltage and current.

By following these instructions, you can ensure reliable and efficient operation of the LM431AIZ/NOPB in your application.

(For reference only)