Details

---

BUY SGM6232YPS8 https://www.utsource.net/itm/p/12607202.html

Below is the parameter table and instructions for the SGM6232YPS8:

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Condition
Input Voltage	VIN	2.7	-	5.5	V	-
Output Voltage	VOUT	-	3.3	-	V	Fixed output
Output Current	IOUT	-	300	500	mA	Continuous
Quiescent Current	IQ	-	2.5	3.5	渭A	No load
Dropout Voltage	VDROPOUT	-	250	400	mV	IOUT = 300mA
Load Regulation	-	-	0.1	0.3	%	IOUT: 0mA to 500mA
Line Regulation	-	-	0.1	0.3	%	VIN: 2.7V to 5.5V
PSRR (Power Supply Rejection Ratio)	-	-	70	80	dB	f = 1kHz
Operating Temperature Range	Toperating	-40	-	85	掳C	-
Storage Temperature Range	Tstorage	-65	-	150	掳C	-

Instructions

1. Input Voltage (VIN):

   • The input voltage range is from 2.7V to 5.5V. Ensure that the input voltage does not exceed these limits to avoid damaging the device.

2. Output Voltage (VOUT):

   • The output voltage is fixed at 3.3V. This is suitable for powering devices that require a stable 3.3V supply.

3. Output Current (IOUT):

   • The device can provide up to 500mA of continuous output current. For optimal performance, it is recommended to operate within the 300mA to 500mA range.

4. Quiescent Current (IQ):

   • The quiescent current is very low, typically around 2.5渭A with a maximum of 3.5渭A when there is no load. This makes the device suitable for battery-powered applications.

5. Dropout Voltage (VDROPOUT):

   • The dropout voltage is the difference between the input and output voltages when the device is operating near its minimum input voltage. It is typically around 250mV and can go up to 400mV at 300mA output current.

6. Load Regulation:

   • The load regulation is the change in output voltage due to changes in load current. It is typically 0.1% and can go up to 0.3% as the load current varies from 0mA to 500mA.

7. Line Regulation:

   • The line regulation is the change in output voltage due to changes in input voltage. It is typically 0.1% and can go up to 0.3% as the input voltage varies from 2.7V to 5.5V.

8. PSRR (Power Supply Rejection Ratio):

   • The PSRR measures the ability of the device to reject noise on the input voltage. At 1kHz, the PSRR is typically 70dB and can be as high as 80dB.

9. Operating Temperature Range:

   • The device can operate over a temperature range from -40掳C to 85掳C. Ensure that the ambient temperature does not exceed these limits to maintain reliable operation.

10. Storage Temperature Range:

    • The device can be stored over a temperature range from -65掳C to 150掳C. However, ensure that it is brought back to the operating temperature range before use.

Application Notes

• Capacitors:

  • Use a 1渭F ceramic capacitor on the input and output to ensure stability and reduce ripple.
  • Place the capacitors as close as possible to the device to minimize parasitic inductance.

• PCB Layout:

  • Keep the PCB layout compact and minimize trace lengths, especially for the input and output paths.
  • Use wide traces for the power paths to reduce resistance and heat generation.

• Thermal Management:

  • If the device is expected to operate at high output currents or in high ambient temperatures, consider adding a heatsink or ensuring adequate airflow.

By following these parameters and instructions, you can ensure the optimal performance and reliability of the SGM6232YPS8 in your application.

(For reference only)