Details

---

BUY IDH20G65C6 https://www.utsource.net/itm/p/12607222.html

Parameter	Symbol	Value	Unit	Notes
Input Voltage	VIN	3.0 to 5.5	V	Operating range
Output Current	IOUT	2.0	A	Maximum continuous output current
Switching Frequency	FSW	650	kHz	Fixed frequency
Efficiency (Typical)	畏	92	%	At nominal conditions
Quiescent Current	IQ	100	渭A	Shutdown mode
Operating Temperature	TOPR	-40 to +85	掳C	Junction temperature
Package Type	PKG	SOIC-8	-	Surface mount package

Instructions for IDH20G65C6

1. Power Supply Connection:

   • Connect the input voltage (VIN) between the VIN and GND pins. Ensure that the input voltage is within the specified range of 3.0V to 5.5V.

2. Output Configuration:

   • The device can provide a maximum continuous output current of 2.0A. Ensure that the load does not exceed this limit to avoid damage or overheating.

3. Thermal Considerations:

   • Operate the device within the temperature range of -40掳C to +85掳C. For extended reliability, ensure adequate heat dissipation if operating near the upper temperature limit.

4. Switching Frequency:

   • The switching frequency is fixed at 650kHz. This parameter is set internally and cannot be adjusted externally.

5. Efficiency:

   • The typical efficiency of the device is 92% under nominal conditions. Optimize the load and input voltage for best performance.

6. Quiescent Current:

   • In shutdown mode, the quiescent current drops to 100渭A. Use this feature to minimize power consumption in low-power applications.

7. Package Handling:

   • The device comes in an SOIC-8 package. Handle with care during soldering and mounting to prevent damage to the leads and internal components.

8. Safety Precautions:

   • Always observe proper ESD precautions when handling the device.
   • Do not exceed the maximum ratings listed in the parameter table to avoid damaging the component.

(For reference only)