Details

---

BUY RT6930 https://www.utsource.net/itm/p/12607246.html

Parameter	Description	Value	Unit
Input Voltage	Operating voltage range	2.7 to 5.5	V
Output Voltage	Adjustable output voltage	0.8 to 3.6	V
Quiescent Current	Current consumption in operation	1.0	mA
Dropout Voltage	Voltage difference between input and output	0.4	V
Load Current	Maximum load current	300	mA
Package Type	Physical package	SOT-23

Instructions for RT6930:

1. Power Supply Connection:

   • Connect the input voltage to the VIN pin.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Output Configuration:

   • Adjust the output voltage using external resistors connected to the FB pin.
   • The output voltage can be set between 0.8V and 3.6V.

3. Grounding:

   • Connect the GND pin to a common ground point in your circuit.

4. Capacitor Placement:

   • Place an input capacitor (typically 1渭F) close to the VIN pin.
   • Place an output capacitor (typically 1渭F) close to the VOUT pin for stability.

5. Thermal Considerations:

   • Ensure adequate heat dissipation, especially under high load conditions.
   • The device is designed for low thermal resistance with the SOT-23 package.

6. Operating Conditions:

   • Ensure that the load current does not exceed 300mA to avoid overheating or damage.
   • Keep the dropout voltage in mind when selecting input and output voltages.

7. Storage and Handling:

   • Store in a dry environment to prevent moisture damage.
   • Handle with care to avoid static damage; use proper ESD precautions.

(For reference only)