Details

---

BUY SDA4212 https://www.utsource.net/itm/p/12607250.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.7	-	5.5	V	Operating supply voltage range
Output Current	Iout	-	300	500	mA	Maximum continuous output current
Quiescent Current	Iq	-	10	20	渭A	Current consumed by the device when no load is applied
Dropout Voltage	Vdo	-	200	300	mV	Voltage difference between input and output at max load
Thermal Shutdown	TSD	-	160	180	掳C	Temperature at which the device shuts down to prevent damage
Operating Junction Temp	TJ	-40	-	125	掳C	Range of temperatures over which the device operates reliably
Storage Temperature	Tstg	-65	-	150	掳C	Range of temperatures over which the device can be stored
Output Voltage Range	Vout	-	-	-	V	Adjustable from 1.22V to Vcc - 1.2V

Instructions for Using the SDA4212

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
   • Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.

2. Output Configuration:

   • The output voltage (Vout) can be adjusted using an external resistor divider network.
   • Connect the feedback pin (FB) to the output pin (OUT) through a resistor (R1).
   • Connect the other end of R1 to ground through another resistor (R2).
   • Use the formula ( V_ = 1.22 left(1 + fracright) ) to set the desired output voltage.

3. Thermal Management:

   • Ensure adequate heat dissipation, especially when operating at high output currents.
   • Place the device on a heatsink or use a thermal pad to improve heat transfer.

4. Protection Circuits:

   • The device includes thermal shutdown and overcurrent protection.
   • If the junction temperature exceeds 160掳C, the device will shut down to prevent damage.
   • The maximum continuous output current is 500mA, but the device is designed to handle up to 300mA continuously without significant heating issues.

5. Capacitor Selection:

   • Use a 1渭F ceramic capacitor between the Vcc and GND pins to stabilize the input voltage.
   • Use a 10渭F electrolytic capacitor between the OUT and GND pins to filter the output voltage.

6. Storage and Handling:

   • Store the device in a dry environment with temperatures between -65掳C and 150掳C.
   • Handle the device with care to avoid static discharge, which can damage the internal components.

By following these instructions, you can ensure optimal performance and reliability of the SDA4212.

(For reference only)