Details

---

BUY IS41C16100-60K https://www.utsource.net/itm/p/12607252.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating	2.7	-	3.6	V
Standby Current	Iccs	VCC = 3.0V, All Outputs High-Z	-	5	-	渭A
Active Current	Icca	VCC = 3.0V, All Outputs High-Z	-	100	-	mA
Access Time	ta	VCC = 3.0V, CL = 50pF	45	-	60	ns
Cycle Time	tcyc	VCC = 3.0V, CL = 50pF	60	-	-	ns
Output High Voltage	VOH	VCC = 3.0V, IOH = -0.4mA	2.4	-	VCC	V
Output Low Voltage	VOL	VCC = 3.0V, IOL = 3.2mA	GND	-	0.4	V
Input High Voltage	VIH	-	2.0	-	VCC	V
Input Low Voltage	VIL	-	GND	-	0.8	V
Data Retention Voltage	VDR	-	2.7	-	3.6	V
Data Retention Current	IDR	VCC = 3.0V, All Outputs High-Z	-	1	-	渭A

Instructions:

1. Power Supply: Ensure the supply voltage (VCC) is within the range of 2.7V to 3.6V for proper operation.
2. Standby and Active Current: The device consumes minimal current in standby mode (5渭A typical) and up to 100mA in active mode.
3. Timing Parameters:
   • Access Time (ta): The time required for the device to access data after receiving a valid address, typically 45ns to 60ns.
   • Cycle Time (tcyc): The minimum time between successive accesses, typically 60ns.
4. Output Voltage Levels:
   • VOH (Output High Voltage): The output voltage when high, should be at least 2.4V and can go up to VCC.
   • VOL (Output Low Voltage): The output voltage when low, should not exceed 0.4V.
5. Input Voltage Levels:
   • VIH (Input High Voltage): The input voltage considered as high, must be at least 2.0V.
   • VIL (Input Low Voltage): The input voltage considered as low, must not exceed 0.8V.
6. Data Retention:
   • Data Retention Voltage (VDR): The device retains data within the voltage range of 2.7V to 3.6V.
   • Data Retention Current (IDR): The current consumed during data retention is typically 1渭A.

Ensure all conditions and specifications are met to achieve optimal performance and reliability.

(For reference only)