Details

---

BUY T9AV1L12-12 https://www.utsource.net/itm/p/12607263.html

Parameter	Value	Unit
Part Number	T9AV1L12-12	-
Type	SMD Inductor	-
Inductance	12.0	渭H
Tolerance	卤20%	%
Rated Current	1.2	A
DC Resistance	0.15	惟
Self-Resonant Frequency (SRF)	30	MHz
Operating Temperature	-40 to +125	掳C
Package	0805	-
Shielding	Shielded	-
Mounting	Surface Mount	-

Instructions for Use:

1. Handling:

   • Handle the component with care to avoid damage.
   • Use appropriate ESD protection measures to prevent static damage.

2. Soldering:

   • Preheat the PCB to 120掳C to 150掳C before soldering.
   • Use a soldering iron with a temperature setting between 300掳C to 350掳C.
   • Apply solder to the pads and ensure the component is securely attached without excessive pressure.
   • Avoid overheating the component during soldering, as this can damage the inductor.

3. Mounting:

   • Ensure the PCB is clean and free of contaminants before mounting the inductor.
   • Place the inductor on the designated pads with the correct orientation.
   • Use a reflow soldering process if applicable, following the recommended temperature profile.

4. Inspection:

   • After soldering, inspect the component for proper alignment and solder joint quality.
   • Ensure there are no shorts or open circuits.

5. Testing:

   • Test the inductance value using an LCR meter to confirm it meets the specified tolerance.
   • Verify the DC resistance to ensure it is within the specified range.

6. Storage:

   • Store the components in a dry, cool place to prevent moisture damage.
   • Keep the components in their original packaging until ready for use.

(For reference only)