Details

---

BUY PALCE20V8H-25PC https://www.utsource.net/itm/p/12607286.html

Parameter	Description	Value
Package Type	Package style	PLCC-20
Operating Voltage (Vcc)	Supply voltage range	3.3V to 5.5V
Logic Family	Type of logic family	CMOS
Configuration Memory	Non-volatile memory for configuration storage	8K x 16 bits
Macrocells	Number of macrocells available for design	20
I/O Pins	Number of input/output pins	16
Max Clock Frequency	Maximum frequency the device can operate at	25 MHz
Power Consumption	Typical power consumption	100 mW
Operating Temperature	Range of temperature for operation	-40°C to +85°C
Programming Method	Method used to program the device	ISP (In-System Programmable)
Erase Method	Method used to erase the device	Electrical

Instructions for PALCE20V8H-25PC:

1. Power Supply Connection:

   • Connect Vcc to a supply voltage between 3.3V and 5.5V.
   • Ensure GND is properly connected to ground.

2. Programming:

   • Use an appropriate programmer that supports ISP.
   • Follow the programming software instructions to load your design into the device’s non-volatile memory.

3. Configuration:

   • Before applying power, ensure all I/O pins are set according to the design requirements.
   • The device will automatically configure itself from the stored configuration upon power-up.

4. Operation:

   • Once powered and configured, the device operates based on the programmed logic.
   • Monitor power consumption and temperature to ensure they remain within specified limits.

5. Erasing:

   • To erase the device, use the electrical erase method supported by the programming hardware.

6. Handling:

   • Handle with care to avoid damage from electrostatic discharge (ESD).
   • Store in anti-static packaging when not in use.

(For reference only)