Details

---

BUY FCH10U15 https://www.utsource.net/itm/p/12607292.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Input Voltage	VIN	4.5	-	16	V
Output Voltage	VOUT	1.8	-	5.5	V	Adjustable
Output Current	IOUT	-	10	15	A	Continuous
Efficiency	畏	-	92	-	%	At nominal conditions
Switching Frequency	fSW	-	600	-	kHz
Quiescent Current	IQ	-	10	30	渭A	Shutdown mode
Operating Temperature	TOPR	-40	-	125	掳C
Storage Temperature	TSTG	-65	-	150	掳C

Instructions:

1. Input Voltage (VIN): Ensure the input voltage is within the range of 4.5V to 16V. Exceeding these limits can damage the device.
2. Output Voltage (VOUT): The output voltage is adjustable between 1.8V and 5.5V. Use the external resistor divider to set the desired output voltage.
3. Output Current (IOUT): The device can provide a continuous output current of up to 15A. For reliable operation, ensure the load does not exceed this limit.
4. Efficiency (畏): The efficiency is typically 92% under nominal conditions. Optimize the design for maximum efficiency by minimizing parasitic losses.
5. Switching Frequency (fSW): The switching frequency is fixed at 600kHz. This helps in reducing the size of external components like inductors and capacitors.
6. Quiescent Current (IQ): In shutdown mode, the quiescent current is typically 10渭A and can go up to 30渭A. This is important for low-power applications.
7. Operating Temperature (TOPR): The device operates reliably over a temperature range of -40掳C to 125掳C. Ensure adequate heat dissipation for high-power applications.
8. Storage Temperature (TSTG): Store the device in an environment with temperatures ranging from -65掳C to 150掳C to avoid degradation.

Additional Notes:

• Always use appropriate decoupling capacitors on both the input and output sides to ensure stable operation.
• Follow the recommended PCB layout guidelines to minimize noise and improve performance.
• For detailed application notes and further information, refer to the datasheet provided by the manufacturer.

(For reference only)