Details

---

BUY VHCT541A https://www.utsource.net/itm/p/12607305.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Supply Voltage	VCC	2.0	-	5.5	V
Output High Level	VOH	-	-	VCC-0.5	V	IOH = -4 mA
Output Low Level	VOL	0	-	0.5	V	IOL = 16 mA
Input Low Level	VIL	-	-	0.8	V
Input High Level	VIH	2.0	-	VCC	V
Propagation Delay Time	tpd	-	5	9	ns	VCC = 5V, TA = 25°C
Power Dissipation	PD	-	-	100	mW
Operating Temperature	TOPR	-40	-	85	°C
Storage Temperature	TSTG	-65	-	150	°C

Instructions:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
   • Connect VCC to the positive power supply and GND to the ground.

2. Input Levels:

   • Input signals should be within the specified input low level (VIL) and input high level (VIH) ranges.
   • For reliable operation, ensure VIL ≤ 0.8V and VIH ≥ 2.0V.

3. Output Levels:

   • The output high level (VOH) should be at least VCC - 0.5V when sourcing current up to 4 mA.
   • The output low level (VOL) should be no more than 0.5V when sinking current up to 16 mA.

4. Propagation Delay:

   • The typical propagation delay time (tpd) is 5 ns with a maximum of 9 ns under standard conditions (VCC = 5V, TA = 25°C).

5. Temperature Range:

   • The operating temperature (TOPR) should be between -40°C and 85°C.
   • The storage temperature (TSTG) can range from -65°C to 150°C.

6. Power Dissipation:

   • The maximum power dissipation (PD) is 100 mW. Ensure proper heat dissipation if operating near this limit.

7. Handling:

   • Handle the device with care to avoid electrostatic discharge (ESD) damage.
   • Follow recommended soldering and mounting procedures to ensure reliable performance.

8. Testing:

   • Verify all connections and parameters before applying power to the device.
   • Use a multimeter or oscilloscope to check input and output levels during testing.

9. Applications:

   • Suitable for digital logic circuits, data communication, and signal conditioning applications.

(For reference only)