Details

---

BUY MPSU07 https://www.utsource.net/itm/p/12607342.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	2.5	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	-	3.3	-	V	Fixed output voltage
Output Current	IOUT	-	1.5	2.0	A	Maximum continuous output current
Quiescent Current	IQ	-	50	100	渭A	Quiescent current at no load
Efficiency	畏	-	90	-	%	Typical efficiency at full load
Dropout Voltage	VDROPOUT	-	200	300	mV	Typical dropout voltage at full load
Load Regulation	-	-	1	2	%	Load regulation from 0 to full load
Line Regulation	-	-	0.5	1	%	Line regulation over the input voltage range
Ripple Rejection	-	-	60	80	dB	Power supply rejection ratio (PSRR)
Operating Temperature	Toper	-40	-	85	掳C	Operating temperature range
Storage Temperature	Tstg	-65	-	150	掳C	Storage temperature range
Package	-	-	-	-	SOT-23-5	Package type

Instructions for Using the MPSU07:

1. Input Connection:

   • Connect the positive terminal of the power supply to the VIN pin.
   • Connect the ground (GND) of the power supply to the GND pin.

2. Output Connection:

   • Connect the load to the VOUT pin.
   • Ensure the load is within the maximum output current rating of the device.

3. Bypass Capacitors:

   • Place a 1 渭F ceramic capacitor between VIN and GND as close to the device as possible to filter out noise and improve stability.
   • Place a 1 渭F ceramic capacitor between VOUT and GND to stabilize the output and reduce ripple.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if operating near the maximum output current, especially in high ambient temperatures.
   • The device is designed to operate efficiently, but thermal management is crucial for reliable operation.

5. PCB Layout:

   • Keep the PCB traces short and wide to minimize resistance and inductance.
   • Use a ground plane to help with heat dissipation and reduce noise.

6. Storage and Handling:

   • Store the device in a dry, cool place away from direct sunlight.
   • Handle with care to avoid damage to the pins and package.

7. Testing:

   • Before connecting the load, test the output voltage with a multimeter to ensure it is within the expected range.
   • Gradually increase the load to the maximum rated current to monitor performance and temperature.

8. Safety:

   • Always follow proper electrical safety practices when handling and testing the device.
   • Do not exceed the maximum ratings specified in the parameter table to avoid damage or failure.

(For reference only)