Details

---

BUY G2R-1-E-DC12 https://www.utsource.net/itm/p/12607358.html

Parameter	Description	Value
Model Number	Full model designation	G2R-1-E-DC12
Type	Relay type	SPDT (Single Pole Double Throw)
Coil Voltage	Operating voltage for the relay coil	DC 12V
Coil Power	Power consumption of the coil	1.0W
Contact Form	Configuration of the relay contacts	SPDT
Contact Rating	Max current and voltage the contacts can handle	10A, 250VAC / 30VDC
Insulation Resistance	Resistance between contacts and coil	100M惟 min @ 500VDC
Dielectric Strength	Voltage withstand capability	2500VAC for 1 minute
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Storage Temperature	Temperature range for storage	-40掳C to +85掳C
Humidity	Relative humidity range	5% to 95% RH non-condensing
Dimensions	Size of the relay	17.5 x 10.5 x 12.5 mm
Weight	Weight of the relay	6g

Instructions:

1. Installation: Ensure that the relay is installed in a well-ventilated area within the specified temperature and humidity ranges.
2. Connection: Connect the coil terminals to a DC 12V power supply. Connect the common (COM), normally open (NO), and normally closed (NC) contacts according to your circuit requirements.
3. Handling: Avoid exposure to corrosive gases or environments. Handle with care to prevent damage to the relay components.
4. Testing: Before operational use, test the relay under no-load conditions to ensure proper functioning.
5. Maintenance: Regularly inspect the relay for any signs of wear or damage. Clean with a soft cloth; do not use solvents.
6. Disposal: Dispose of the relay in accordance with local regulations concerning electronic waste.

(For reference only)