Details

---

BUY 1736DPC https://www.utsource.net/itm/p/12607369.html

Parameter	Description
Part Number	1736-DPC
Product Line	Compact I/O
Type	Digital Input Module
Channels	8 channels
Input Type	DC (24 VDC)
Input Current	5 mA per channel
Input Voltage Range	10 to 30 VDC
Isolation	Channel-to-channel and channel-to-backplane
Operating Temperature	-40掳C to 70掳C (-40掳F to 158掳F)
Storage Temperature	-40掳C to 85掳C (-40掳F to 185掳F)
Relative Humidity	5% to 95%, non-condensing
Vibration	2 g, 10 to 500 Hz
Shock	15 g, 11 ms half-sine wave
Weight	0.1 kg (0.22 lb)
Dimensions	95 mm x 51 mm x 127 mm (3.74 in x 2.01 in x 5.00 in)
Mounting	DIN rail or panel mount
Approvals	UL, cUL, CE, ATEX, IECEx

Instructions for Use

1. Installation:

   • Mount the 1736-DPC module on a DIN rail or panel using the provided mounting clips.
   • Ensure the module is securely fastened and not subjected to excessive mechanical stress.

2. Wiring:

   • Connect the input signals to the appropriate terminals on the module.
   • Use shielded cables to minimize interference.
   • Ensure the input voltage is within the specified range (10 to 30 VDC).

3. Configuration:

   • Use the programming software (e.g., RSLogix 5000) to configure the module.
   • Assign the module address and set up the input channels as required.
   • Configure the input type (DC) and any additional settings such as filtering.

4. Operation:

   • Power on the system and verify that the module is recognized by the controller.
   • Monitor the status indicators on the module to ensure proper operation.
   • Check the input signals and corresponding outputs in the control program.

5. Maintenance:

   • Regularly inspect the module for signs of wear or damage.
   • Clean the module and surrounding area to prevent dust accumulation.
   • Replace any damaged components and re-verify the configuration.

6. Troubleshooting:

   • If the module does not respond, check the power supply and connections.
   • Verify the module address and configuration settings.
   • Refer to the user manual for specific error codes and troubleshooting steps.

7. Safety:

   • Always follow safety guidelines when handling electrical equipment.
   • Disconnect power before performing any maintenance or wiring changes.
   • Use appropriate personal protective equipment (PPE) as needed.

(For reference only)