Details

---

BUY BUZ382 https://www.utsource.net/itm/p/12607375.html

Parameter	Symbol	Min	Typical	Max	Unit	Condition
Supply Voltage	Vcc	4.5	-	5.5	V	-
Input Voltage (High)	VIH	3.15	3.5	5.5	V	-
Input Voltage (Low)	VIL	0	0.8	1.5	V	-
Output Current (Sink)	IOL	-	100	150	mA	Vcc = 5V, Ta = 25掳C
Output Current (Source)	IOH	-	5	10	mA	Vcc = 5V, Ta = 25掳C
Power Dissipation	PD	-	-	625	mW	Ta = 25掳C
Operating Temperature	Topr	-40	-	85	掳C	-
Storage Temperature	Tstg	-65	-	150	掳C	-

Instructions for Using BUZ382:

1. Power Supply:

   • Ensure the supply voltage is within the range of 4.5V to 5.5V.
   • Connect the Vcc pin to the positive supply and GND to the ground.

2. Input Signal:

   • For a high input signal, ensure the voltage is between 3.15V and 5.5V.
   • For a low input signal, ensure the voltage is between 0V and 1.5V.

3. Output Configuration:

   • The device can sink up to 150mA and source up to 10mA.
   • When sinking current, connect the load between the output pin and the positive supply.
   • When sourcing current, connect the load between the output pin and ground.

4. Thermal Management:

   • The maximum power dissipation is 625mW at 25掳C ambient temperature.
   • Ensure adequate heat dissipation if operating near the maximum power dissipation.

5. Temperature Range:

   • The operating temperature range is from -40掳C to 85掳C.
   • Store the device in an environment with temperatures ranging from -65掳C to 150掳C.

6. Handling Precautions:

   • Handle the device with care to avoid static damage.
   • Use proper ESD protection when handling the device.

7. Application Examples:

   • Ideal for driving LEDs, relays, and other small loads.
   • Suitable for use in digital circuits where low power consumption and high reliability are required.

(For reference only)